Roof access hatches
Roof access hatch
polycarbonate, with gas springs
Roof access hatch with multiwall polycarbonate glazing and aluminium frame, with a dual function: roof access and natural daylighting. Manual opening, assisted by gas springs.
- Product code:
- GUL-WD-PC
Photo: GULAJSKI
Documents & certification
- Manufacturer
- GULAJSKI · Wyłaz dachowy
- Product code
- GUL-WD-PC
- DTR 05 (03.2026) — Technical and operational documentation / installation instructions
The documents are provided on request, at office@dasitrade.ro.
Request the documentsDescription
GULAJSKI roof access hatches (rooflights with an access function) with polycarbonate glazing are systemic roof assemblies that, in normal operation, provide easy roof access and natural daylighting through the roof slope.
The tilting segment consists of an aluminium-profile frame, sealed around the whole perimeter with gaskets (preventing water ingress), and a multiwall polycarbonate pane (opal or transparent; other colours on order), fixed with self-tapping screws. The segment is attached to the base with 2–5 stainless-steel hinges, depending on size.
The base (mounting curb) can be made of galvanised steel (min. 1.25 mm) or aluminium (min. 2.0 mm), which requires additional thermal insulation, or of glass-fibre-reinforced polyester laminate (with 20 mm polyurethane foam). It is made straight or sloped, with heights from 150 to 750 mm depending on the roof structure.
Applications
- Roof access for inspection and maintenance
- Natural daylighting of the space below
- Flat roofs above the top floor or above the stairwell in multi-storey buildings
- Flat or low-slope roofs
Technical specifications
| Function | Dual: roof access + natural daylighting |
|---|---|
| Glazing | Multiwall polycarbonate (opal or transparent; other colours on order) |
| Tilting-segment frame | Aluminium profiles, perimeter seals (watertight) |
| Base | Galvanised steel (min. 1.25 mm) or aluminium (min. 2.0 mm): straight / sloped, 150–750 mm. Also in polyester laminate (straight / sloped, 150–500 mm, with 20 mm PU foam) |
| Base insulation (metal variant) | Mineral wool / polystyrene, 40 or 50 mm |
| Hinges | 2–5 stainless steel (depending on size) |
| Actuation | Manual, with gas springs and a handle (reducing the opening force) |
| Locking options | On order: external opening with a handle and a padlock bracket (external or internal; padlock not included) |
| Installation | By the manufacturer’s teams or authorised/trained units; self-installation is allowed if the DTR instructions are followed |
Dimensions
Base height: 150–750 mm for steel/aluminium (straight / sloped); 150–500 mm for laminate. Sizes made to order.
